#11025 Stripper

A caustic stripper containing methylene chloride. It will lift off baked coatings and two part urethane coatings. This material is not designed to be used in enclosed spaces such as elevator cabs. It is also not designed to be used on vertical surfaces.

#11268
Vertical
Stripper

A caustic stripper containing methylene chloride. Similar to the #11025 Stripper except that it is designed to be used on vertical surfaces. It will lift off a baked on coating and a two part urethane coating. Don’t use this stripper in enclosed spaces.

#11533
Stripper

An alternative stripper that does not contain methylene chloride. It will remove baked coatings and urethane coatings.

#70
Cleaning
Thinner

A conventional solvent based cleaning thinner. It will remove most reversible solvent and water based coatings, but will not remove a baked on or urethane coating. It is flammable and has a solvent odor.

#11645
Clean Cut
Brass
Prep

A non-flammable, low odor cleaning thinner. It will remove most solvent and water based products. It will not remove a baked or urethane coating. Like our #70 Cleaning Thinner, it will remove all of our reversible coatings, including our #11650 WB Lacquer. This is our safest cleaning thinner for use in enclosed spaces and has low health hazards.

#11838
Clean Cut
Gel

A non-flammable, low odor stripper for finishes that are more difficult to remove. This product can be difficult to remove. This product can be applied and left on the surface for up to 20 minutes. It has been shown effective in removing both enamel and urethane without methylene chloride.